Ir al contenido principal

Sistema de oxígeno disuelto DOS-X

The DOS-X™ Series is an economical and effective means of enhancing dissolved oxygen content in irrigation water and boosting plant health and production.

Now coming in standardized models capable of treating up to 15,000 gallons per day!

Dissolved Oxygen System

Dissolved oxygen infusion is a burgeoning technology with new applications being found every year. In horticulture, dissolved oxygen has traditionally been controlled by using inefficient blowers and air stones. While being able to marginally raise dissolved oxygen to a natural 8 ppm, surpassing this has been difficult up until recently with the advent of nano- and microbubble infusers. Our new DOS-X™ Series of dissolved oxygen infusers are our refreshed take on D.O. infusion, capable of boosting dissolved oxygen content up to 40-45 ppm – more than 5 times of what can be found in nature! By supplementing dissolved oxygen in irrigation water, horticulturalists can increase their growth rates, help fend off rootzone diseases and decrease fertilizer usage by up to 20%, ultimately saving you time, money and headaches.

The DOS-X™ Series

DOS-X™ Series Product Lineup


Capable of handling up to 4,000 gallons per day


Capable of handling up to 8,000 gallons per day


Capable of handling up to 10,000 gallons per day


Capable of handling up to 15,000 gallons per day

Need a larger system that doesn’t fall into these categories?
Give us a call +1-800-438-4328 or request a quote!

Benefits of the DOS-X™ Series

  • Simple and efficient installation
  • Can be used with either our O2 Gen or locally sourced oxygen tank
  • Rapid ROI
  • Self-cleaning; no need for replacement parts
  • Scalable for irrigation requirements

Benefits of Dissolved Oxygen Infusion

  • Increased Plant Growth
  • Faster Rooting Times
  • Faster Crop Turnover Rates (1-2 weeks less)
  • Reduced Disease Pressure
  • Lower Fertilizer usage and costs

How does the DOS-X™ Series Infuse Dissolved Oxygen?

El DOS-X™ Series utilizes a “mass transfer fiber” allowing for the generation of nanobubbles. These fibers have tiny pores along its surface that are roughly 20 molecules of oxygen wide, allowing for these nanobubbles to form. When these bubbles “pop,” that oxygen is then absorbed and dissolved into irrigation water, resulting in the supranatural dissolved oxygen content modern horticulturalists are looking for.


The new DOS-X™ Series is required to be installed on a recirculation pattern. This recirculation loop is independent of your irrigation system, requiring only the DOS-X™, an oxygen source of your choosing, a power supply and some extra PVC. The inlet is supplanted in your reservoir or pond and is connected to the onboard pump. Water then travels through the dosing matrix and is sent back into our reservoir through a separate pipe. Our optional DO STAT™ can control the entire system based on set point, however a handheld D.O. Meter can be used instead. If using a meter in lieu of a D.O. STAT™, simply hit the on/off switch when the set point is reached.

Logotipo de BioTherm Solutions

El proceso BioTherm


Nuestro experimentado personal le explicará sus deseos y necesidades específicas y le mostrará cómo puede ayudarle BioTherm.


BioTherm diseñará una solución a medida para satisfacer sus requisitos de rendimiento.


Nuestro formato de propuesta, de fácil lectura, explica claramente qué contiene nuestro sistema y cómo funciona.


Disfrute de la asistencia técnica de por vida de cualquier sistema BioTherm. Estamos juntos en esto.

Noticias de BioTherm

Artículos relacionados con la industria y la empresa

Suscríbase a nuestro boletín de noticias

Inscríbase para recibir nuestro boletín por correo electrónico.